click a logo to view entire brand
Brands
Categories

Baileigh DP-1250VS-HS Variable-Speed High-Speed Drill Press

  • Inverter driven
  • MT4 spindle taper
  • 32mm capacity
  • High-Speed Operation

£4,320.00Excl. VAT + Delivery

Description

The DP-1250VS-HS is a high-speed version of the DP-1250VS from Baileigh Industrial. The reason for the high-speed is to allow any shop to enjoy the process of thermal friction drilling. This is a unique process in which a specially designed drillbit melts the material, creating inner walls that can then be tapped. But in order to use this process, the bit must be turning more than 3000rpms. This is where the DP-1250VS-HS high-speed drill press comes in.

The DP-1250VS-HS shares all the exact same features as the DP-1500VS and would be perfect for anybody looking to upgrade their current drill. The DP-1250VS-HS from Baileigh Industrial is a 20” drill press that has a capacity of 1.25” mild steel. It uses 220 volt, single phase power to run a Delta® inverter. The inverter regulates the amount of power and RPMs to the spindle. Using an inverter to drive its massive MT4 spindle gives the DP-1250VS-HS the ability to set RPMs to an exact speed; from 0rpm to 4000rpm. It also has a reverse function and can tap.

The DP-1250VS-HS uses a heavy-duty cast iron base that has a coolant system built right in. The DP-1250VS-HS also has a 4.5” wide column that was designed to minimise the flex. The worktable has been machined, polished and has T-slots for work-holding devices.

Other features include a spindle safety shield with limit switch and halogen worklight.

Contact Baileigh Industrial today for more information on the DP-1250VS-HS high-speed drill press, or if you have question about thermal friction drilling.

Shown with optional chuck & taper.

Specifications

Item Number DP-1250VS-HS
Country of Manufacture Taiwan
Table Dimensions 559 mm x 470 mm
Motor 1.5 kW
Quill Diameter 75 mm
Spindle Nose to Table 925 mm
Spindle Nose to Base 1225 mm
Spindle Speed High 540 – 4000 rpm
Spindle Speed Low 85 – 540 rpm
Spindle Taper MT 4
Table Slot 16 mm
Tapping Capacity 19 mm
Motor Coolant 0.125 kw
Shipping Weight 385 kgs.
Swing 530 mm
Drill Capacity 32 mm
Spindle Travel 150 mm
Column Diameter 115 mm
Base Dimensions L x W 685 mm x 485 mm
Shipping Dimensions (Inches) 620 x 940 x 1870 mm

* specifications subject to change without notice.